Firstgens.com

Anyone have an opinion on whats the best way to add power steering (fast-ratio mod is what I'm looking for) to a 67 with manual steering now.

Crate350 with no accessories, so I'm gonna have to buy everything - pump, pulley, hoses, box, ragjoint, etc.

Any opionions as where to start? Should I get all stock 67-69 stuff or is there a better "kit" to start from.

Rob

I used a 67 Caprice for the pump, pulleys, brackets, hoses, and a 69 Judge for the box,
Firebird, for the steering arms. Oh by the way the A/C came out of the Caprice also.
My tilt telly column, and power windows are out of a 71 Caddy. Buy them cheep option from the junk yard.

I don't know if there is an actual kit out there.You can get a rebuilt 87-92 I-ROC or T/A box(Cardone part#276550 which is the fast ratio box,with some effort),power steering pump,Moog pitman arm (if you need to change it,I think the correct one is like 5 7/8"),hoses at any auto parts store,line adapters for the new box (they install in the new box,it's metric your old one isn't),new rag joint at Lee Manufacturing 1-818-768-0371,they are familiar with the swap.I'm sure you could find the misc. parts(pulleys,brackets) at one of the resto houses or maybe the bone yard.I seem to remember having to remove a check valve on the Cardone box that I used,with it in it ran a little too hot.Nice improvment over stock with out blowing the budget.Long or short water pump on the crate motor,makes a difference with brackets and pulleys.http://www.alangrovecomponents.com does carry an assortment of after market pulleys and brackets,I used one of their brackets for my P/S pump,nothing fancy but it worked.

First place I would look for parts and kits is eBay. I see them on there all the time. Complete new kits and parts that you want.